1. Check the Fuses. To troubleshoot a non-functional power window on the passenger side, start by inspecting the fuse. Look for the fuse box under the dashboard or in the engine compartment of your vehicle, and refer to the owner’s manual to identify the fuse responsible for the power windows. This is a known problem with Santa Fe's. The window regulator causes the window to squeak. Get the dealer to replace it with a new one asap and don't let them talk you into lubricating parts as that is only a temporary solution. bambew Member Posts: 43. June 2008. MAZDA CLOCK/CIG/DEFROSTER. WORKSHEET. 1.The clock display will not dim when the Trace in RED the area(s) that could be at. 2.The clock loses its time (memory) each time has to be reset with the correct time. Trace in BLUE the area(s) that could be at. 3.The clock display never light up. How to fix the drivers side power window on a Mazda 3. In this video I describe how to fix the drivers side window that goes down ok, but has a hard time going up. Basically what I did was use a Hi, I have a three year old Mazda 6 and have encountered a problem with the electric windows on the drivers side. The drivers window has stopped working at all although there is a clicking noise from the motor in the door when you press the switch. The back door drivers side works intermittently, sometimes sticking, sometimes working if you . If not, please let me know where the best place is and I’ll post there. Thank you. —————————————————- So we have a 2007 Mazda 5. It started with the rear driver side passenger power window intermittently working and now, not working. Good thing is, it’s closed. I have tried resetting the switch for that MECHANIC. 33,600 POSTS. When a window doesn't work in only one direction and only from one switch, the culprit can be either switch, the driver's or that passenger's switch. That's hard to understand at first, but there's actually four sets of contacts in each switch, and two are in play in both switches, regardless which one is pressed. Press the switch and fully open the window. Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed. Repeat Steps 3-4 for the front passenger power window while seated in the front passenger seat. Repeat Steps 3-4 for both the left and right rear power windows while seated Now, the car has after-market tinting on the windows (it was fitted prior to my purchasing the vehicle), and on a particularly hot day about three months ago, both of the rear windows just wouldn't go down any more. I didn't have time to bother with it, but when idly pressing the button one cooler day, one of the rear windows gave a bit of a "pop!" Turn the ignition switch to the ON position. 2. Make sure that the power window ‘lock’ switch located on the driver's door is not depressed. 3. Press the switch mounted on one of the rear doors and fully open the window. 4. Pull up the switch to fully close the power window and continue holding the switch for about 2 seconds after the

mazda 3 rear power window not working